Description:

Save energy and help the environment by installing this DIY kit in less than an hour. Automate your lights so that they turn on when motion is detected and turn off a programmable amount of time after the motion stops.

This kit includes the following products:

2x Light Socket Modules - these screw into existing ceiling light sockets, and then allows an incandescent bulb to be fitted into each of them. When they receive their assigned X10 command, they will individually turn the connected light on/off (note - dimming not supported).

2x Wireless Motion Sensors - these can be positioned in a room and will transmit an 'X10' ON command when motion is detected, and transmit an OFF command several minutes after you leave the room. Have your lights and appliances turn on as you enter, and never forget to switch them off again as you exit! What's more, the motion sensors can even be programmed to only operate during night-mode, if desired.

1x RF-Transceiver - this is plugged into any powerpoint and acts as a transceiver, to convert commands from the remote control into signals that can travel through the mains of your home, to reach the Appliances Modules, Lamp Modules and Light Sockets. It also detects the signals through walls and ceilings, allowing the unit to be hidden out of sight. The RF Transceiver itself also double as an Appliance Module, allowing one extra appliance to be controlled.

Fully expandable with extra X10 Receivers and Transmitters. Include remote control options by adding an RF Remote Control.